WE PRINT BANNERS FAST / THE JOURNAL BANNER GUIDES & IDEAS

Banner Grommets and Hems Explained: What They Do and Why They Matter

Illustration about hems and grommets for hanging printed banners

Quick answer: banner grommets are reinforced metal rings installed near the edge of a banner so you have strong, defined attachment points for rope, zip ties, bungees, hooks, or other appropriate mounting hardware. A banner hem is the reinforced edge around the banner. The two work together: the hem strengthens the perimeter, while the grommets give you places to attach the banner without punching stress directly into an unsupported raw edge.

That sounds simple, but it matters more than most buyers realize. A banner can be printed beautifully and still fail early if the finishing or installation is wrong. Hems, grommets, fastener spacing, banner size, and wind exposure all affect how the finished banner behaves once it leaves the print shop.

What Is a Banner Grommet?

A banner grommet is a small metal ring installed through the banner material, usually near the perimeter. Its job is to create a durable opening that can accept mounting hardware without forcing a rope, hook, zip tie, or bungee directly through the vinyl.

Without a grommet, pulling hardware through a simple hole in vinyl can concentrate force on the edge of that hole. That can make the material more likely to stretch or tear. A properly installed grommet gives the fastener a stronger, cleaner attachment point.

Grommets are common because they are simple, versatile, and work with many real-world mounting surfaces: fences, walls, railings, temporary structures, posts, and event displays.

What Is a Banner Hem?

A banner hem is a reinforced edge created by folding or otherwise strengthening the perimeter of the banner. The exact production method can vary, but the purpose is the same: create a stronger outer border than a single raw layer of material.

That matters because the perimeter takes a tremendous amount of abuse. It is where the banner is pulled, tied, fastened, tensioned, and exposed to repeated movement. Outdoors, it is also where wind-induced stress often begins.

A hemmed banner therefore has more structure around the area where the mounting hardware is working.

How Banner Hems and Grommets Work Together

Think of the hem as the reinforced foundation and the grommet as the attachment point.

The grommet creates a clean hole for hardware. The hem gives that grommet a stronger area of material to sit in. When a banner is properly finished and properly installed, force from the mounting hardware can be spread across the reinforced perimeter instead of being concentrated into a thin unsupported edge.

This is one reason hems and grommets are such a common pairing on vinyl banners.

For a broader overview of finishing choices, visit our Banner Finishing Guide.

Why Raw Vinyl Edges Behave Differently

Raw or flush-cut vinyl is not automatically defective. Some banner constructions and installation systems use unhemmed edges successfully. But a raw edge behaves differently from a sewn hem because there is less material at the perimeter.

If you are hanging a banner with multiple mechanical attachment points, especially outdoors, reinforcement around those points can become important. A fastener does not know or care how good your artwork looks. It simply transfers force into the material around it.

The more concentrated that force becomes, the more important edge construction and attachment spacing become.

Why Attachment Points Matter

A banner is only as secure as the system holding it up.

Imagine a 10-foot-wide banner attached at only four corners. Every gust, tug, vibration, and movement has to be resisted largely by those four locations. Now imagine the same banner supported at regular intervals around the perimeter. The load can be shared by many more points.

That is the basic reason attachment-point spacing matters.

More attachment points do not magically make a banner indestructible, but they can help distribute forces more evenly and reduce the amount of work any single grommet has to do.

How Grommets Help Distribute Stress

Grommets do not distribute stress by themselves. The installation pattern does.

If a banner has ten grommets but you use only the four corners, the other six are not helping. If you use attachment points around the perimeter with reasonably even tension, the system has more opportunities to share the load.

This distinction is important. Customers sometimes blame a pulled-out grommet when the deeper issue was that one grommet was being asked to carry too much load.

Common Banner Grommet Placement Concepts

Banner printers commonly offer some variation of the following:

  • Grommets at the four corners
  • Grommets at corners plus regular intervals along the perimeter
  • Top-edge grommets for certain hanging applications
  • Custom or application-specific placement

The best arrangement depends on the banner size, the surface, whether the banner is indoors or outdoors, how exposed it is, and the hardware being used.

There is no universal spacing rule that is perfect for every banner and every installation. What matters is that the support pattern matches the real conditions.

Corners Only vs. Perimeter Support

For a small indoor banner in a calm environment, four-corner attachment may be perfectly practical. There is very little wind, the banner is lightweight, and the display may only be temporary.

Outdoors, the equation changes.

Wind can push against the full surface of the banner. If only the corners are attached, those corners can become highly loaded. Perimeter support gives the installer more points to share the force and control flapping.

If you are hanging a banner where wind is part of the equation, see our guide on how to keep an outdoor banner from tearing in wind.

Why Large Banners Need More Support

As a banner gets larger, its total surface area increases. That matters because a larger surface gives wind more material to push against and gives gravity more material to pull on.

A 3-by-6-foot banner has 18 square feet of material. A 5-by-20-foot banner has 100 square feet. Those are very different installation problems.

The larger banner may need more attachment points, stronger mounting hardware, more careful tensioning, a different banner material, or professional installation depending on the site.

Never assume that because vinyl itself feels lightweight, a large banner produces insignificant loads once wind gets involved.

Using Grommets on Chain-Link Fences

Chain-link fencing is one of the most common banner mounting surfaces because the openings make it easy to attach zip ties or other suitable fasteners through the grommets.

For fence installations, support the banner at multiple points around the perimeter instead of just the corners. Keep the tension even. Do not cinch one area dramatically tighter than another, and do not leave large unsupported sections free to whip in the wind.

For exposed fence locations, mesh may also be worth considering because its open construction allows some airflow through the banner. Our Mesh Banner Guide explains that material in detail.

Using Grommets on Walls

Wall installations can be very different from fence installations because the wall may block airflow behind the banner. But the mounting hardware becomes more important because drywall, masonry, wood, metal panels, and exterior cladding all require different attachment methods.

The grommet provides the banner attachment point. It does not determine whether the anchor in the wall is appropriate.

Always use hardware suitable for the mounting surface, and use a qualified installer when the location is elevated, public-facing, structurally complex, or otherwise outside a simple temporary installation.

Our Banner Installation Guide covers additional hanging considerations.

What Finishing Does We Print Banners Fast Provide?

Every banner comes hemmed with metal grommets every 2 feet. We don't offer pole pockets or wind slits; every banner is hemmed with metal grommets every 2 feet.

Because the finish is the same on every order, plan the installation around grommet attachment points before ordering. A fence banner, wall banner, stage banner, hanging indoor display, and large outdoor banner may all need different hardware and attachment spacing even if the printed artwork is identical.

For consistently exposed fence applications, compare solid vinyl with mesh, which lets air pass through the material.

Finishing Does Not Replace Proper Installation

This is the most important point in the entire guide.

A hem does not make a banner indestructible. A grommet does not make an anchor safe. Neither guarantees that the support structure can carry the load.

Finishing prepares the banner to be installed. The installation itself still has to be appropriate.

Use suitable hardware. Distribute support. Avoid excessive flapping. Do not overtighten. Inspect outdoor installations periodically. Take temporary banners down when severe conditions exceed what the installation can safely handle.

EXPERT BANNER ANSWERS

KNOW BEFORE
YOU ORDER.

Banner Grommets and Hems Explained: What They Do and Why They Matter: professional buyer questions and practical answers.

Do banners need grommets?

Not every display requires grommets, but they are one of the simplest and most versatile ways to create defined attachment points for a vinyl banner. The best finishing depends on how you plan to hang the banner.

What is the purpose of a hem on a banner?

A hem reinforces the banner perimeter. It gives the edge additional structure and creates a stronger area for mounting and finishing than an unsupported raw edge.

How do you hang a banner with grommets?

Use appropriate fasteners through the grommets and attach them to a suitable supporting structure. Depending on the location, common choices may include zip ties, rope, bungees, hooks, or purpose-built hardware. Support the banner evenly rather than relying on one or two points.

Should I use only the four corner grommets?

Four-corner mounting can work for smaller banners in controlled environments. For larger banners or outdoor installations, using additional perimeter attachment points generally provides better load distribution.

Can grommets tear out?

Yes. Excessive load, poor installation, loose flapping, damaged edges, severe wind, or too few attachment points can overload the material around a grommet. Reinforcement and proper installation help reduce that risk.

What finishing comes on a We Print Banners Fast banner?

We don't offer pole pockets or wind slits; every banner is hemmed with metal grommets every 2 feet.

Can a grommet certify an outdoor banner is safely installed?

No. A metal eyelet reinforces an attachment point, but the installed structure, fasteners, exposure and support capacity determine safety. Have an appropriately qualified installer evaluate the actual setting, especially on elevated or exposed fences.

What happens if the logo overlaps a sewn hem?

Essential information may fold, disappear beneath hardware or become unreadable. Prepare artwork using the finished size and planned finishing, leaving safe space around hems, grommets and pockets. Check the actual proof before approving print.

Are grommet attachments the same on a trade-show stand and an outdoor fence?

No. Indoor stands and wind-exposed outdoor fences need different fastening, and hardware is not included with the banner. Indoor supports and wind-exposed fences impose different installation requirements. Hardware isn't automatically included with a printed banner; the installer must select safe fastening locations and inspect the display while in use.

What should I inspect before reusing a banner with grommets?

Lay the banner flat and examine every grommet for distortion, sharp edges, corrosion or looseness. Check the surrounding hem for stretched holes, cracks, tears or separation, especially at corners and previously stressed attachment points. Inspect the mounting structure and fasteners separately; an intact metal ring does not prove the support is safe. Replace or repair damaged materials through an appropriate professional process before reinstalling.

The Bottom Line

Banner grommets and hems may look like small finishing details, but they play a major role in how a banner is actually used. The hem strengthens the perimeter. The grommets provide defined attachment points. The installation then determines how well the load is shared across those points.

Start with the location. Decide how the banner will hang. Choose finishing that fits that installation. Then support the banner evenly instead of asking a few corners to do all the work.

That simple sequence can make the difference between a banner that hangs cleanly and one that starts fighting its own mounting hardware.

Shop Vinyl Banners


Related Banner Guides